All Categories > Parts Washers and Cleaning Fluids > Solvent / Aqueous Parts Washers > Turbo Action Solvent / Aqueous Parts Washers > Model # T5430  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model # T5430, Turbo Action Solvent / Aqueous Parts Washers



The Turbo-Action Series from Graymills is the perfect solution for hands-off, immersion cleaning required for challenging parts cleaning applications. Turbo-Action total immersion parts cleaners convert the jet stream from Graymills Superflo™ pumps into powerful, hands-off fluid action that gets parts cleaner, faster without manual handling or scrubbing. Unlike spray cabinet type cleaners that employ spray nozzles, total immersion cleaners bring cleaning action to every external and internal surface-even blind holes. Turbo-Action units scour and flush parts clean and are offered in both solvent and heated aqueous versions, with pumps that provide up to 10,000 GPH. The heated aqueous units come standard with energy-saving insulation and corrosion-resistant, insulated stainless steel-lined lids.

A variety of tank sizes and options, including stainless steel tanks, filtration systems and baskets, ensures the Turbo-Action Series can handle your largest cleaning task, including cylinder heads, transmission housings, heavy castings, and complex parts.

The efficiency of immersion cleaning allows more time for the cleaning solution to do the work, provides penetration into blind holes, nested or layered parts, maximizes soak time to loosen contamination, and the Turbo Action of the pump adds to the speed and efficiency of the cleaning process.

With five tank sizes and liquid capacities up to 262 gallons, the largest “Turbo Series” is also available in solvent or aqueous versions. 10,000 gallon per hour flow ensures effective scouring and cleaning of parts.





Features  · Specifications  · Dimensions

Features
  • Total parts immersion provides hands-off cleaning without operator involvement
  • Grid platform (T24/T36 only) or Sludge Trays(T4330-T8430) support parts above bottom - allows for all sides of parts to be exposed to cleaning solution
  • Two-inch drain for easy fluid change-out
  • Multiple tank sizes up to 262 gallon capacity
  • Solvent or aqueous models available; some models can be field-retrofit and converted to aqueous versions if cleaning method changes.
  • Fusible safety link closes lid in event of a fire
  • Variety of options available to handle almost any application: filtration systems, stainless steel tanks, baskets (See Accessories section)



Specifications

Immersion Space (L x W x D)

49-1/2" x 27-1/2" x 23-1/4"

Overall Dimensions (L x W x H) (Lid Open)

66-1/2" x 30" x 67"

Operating Fluid Capacity

169 GAL

No. of Pumps

1

Motor Horsepower

1-1/2 HP

Flow

10000 GPH

Electrical / Motor Information

230/460 V, 50/60 Hz, 1 or 3 Phase

Heater Power1

4.5 kW

Heater Temperature

60 to 180 ºF
15 to 82 ºC

Available Cleaning Action

Heated (Aqueous Only) (Optional)
In-Tank Fluid Agitation (Standard)
Soak (Standard)
1 Heater for water-based cleaning only


Dimensions

A

49-1/2 "

B

66-1/2 "

C

37 "

D

67 "

E

27-1/2 "

F

30 "

G

23-1/4 "


 DOWNLOADS 

TURBO-ACTION SERIES OMI
(PDF, 1326KB)

ROLLER CONVEYER ASSEMBLY DIAGRAM
(PDF, 502KB)



 Turbo Parts Cleaner Cleaning Fluids 


General Purpose Solvents
Super Agitene™
General Purpose Solvents


General Purpose Solvents
Regular Agitene™
General Purpose Solvents

more available ..


GRAYMILLS | INKING SYSTEMS • PARTS WASHERS • INDUSTRIAL PUMPS